What's the best way you have found to turn your BAM B50 / B51

What's the best way you have found to turn your BAM B50 / B51

Joined: July 11th, 2001, 6:08 pm

December 2nd, 2011, 3:58 am #1

power WAY down?

I'd like to get 8-10 foot pounds in 22.

I tried adjusting the screw inside, but apparently mine is not stock.

--------------------------

Diamondback

Truth is Stranger than Fiction.....
Reply
Share

Joined: November 30th, 2006, 2:44 am

December 2nd, 2011, 4:01 am #2

I replaced my stock hammer spring w/ a lighter one I found at Ace Hardware.
Reply
Share

Joined: March 3rd, 2005, 1:38 pm

December 2nd, 2011, 3:26 pm #3



mailto:flyingdragonairrifles@hotmail.com
Bestairgun.com 515-924-3699
Reply
Share

Joined: March 28th, 2002, 6:54 pm

December 2nd, 2011, 3:39 pm #4

power WAY down?

I'd like to get 8-10 foot pounds in 22.

I tried adjusting the screw inside, but apparently mine is not stock.

--------------------------

Diamondback

Truth is Stranger than Fiction.....
out as far as it will go and still be locked by the side set screw.Then test and adjust power by increasing striker throw(extension backed into the striker)
Reply
Share

Joined: March 31st, 2009, 5:03 pm

December 2nd, 2011, 8:56 pm #5

Reply
Share

Joined: November 13th, 2005, 6:05 am

December 4th, 2011, 7:22 am #6

power WAY down?

I'd like to get 8-10 foot pounds in 22.

I tried adjusting the screw inside, but apparently mine is not stock.

--------------------------

Diamondback

Truth is Stranger than Fiction.....
There are several ways to turn down the power on the B-50/51. Lighter hammer spring, lighter hammer weight, extend the screw in the hammer to make it a shorter travel with less momentum, and change out the transfer port to a smaller diameter.

Http://www.bigedmachining.com
Reply
Share