Help with my unsafe B30 trigger!

Help with my unsafe B30 trigger!

Joined: September 22nd, 2008, 11:40 pm

March 23rd, 2012, 7:03 am #1

My little brother tried to "adjust" my B30 trigger for me and now it fires randomly! The main time it goes off is when you disengage the safety. I cannot figure out a safe setting for the screws. I have tried the manual and contacted the importer to no avail. Their solution was buy something not discontinued. I really don't want to have to destroy it. It is tuned to 27fpe, and I can sometimes get ragged clover groups at 50 yards and I'm a little bummed. Anybody have any suggestions? It has many, many thousands of rounds through it. Might something just be worn?
Quote
Share

Joined: March 3rd, 2005, 1:38 pm

March 23rd, 2012, 10:30 am #2

Thats for sure, Don't know what it could be but it can be repaired...Flying Dragon has the parts if you know what you need otherwise it will have to be sent in for repair...

mailto:flyingdragonairrifles@hotmail.com Flying Dragon Air Rifles 515-924-3699
Quote
Share

Joined: September 22nd, 2008, 11:40 pm

March 23rd, 2012, 7:32 pm #3

Maybe I could put my good tarred spring, guide, piston seal and what ever else will fit in a B26-2, a B25 or one of the XS48 underlevers? Then maybe I can just sell the stock and scrap the rest.
Last edited by 187penguin on March 23rd, 2012, 7:36 pm, edited 1 time in total.
Quote
Share

Joined: October 2nd, 2009, 10:15 pm

March 23rd, 2012, 9:09 pm #4

I don't think those internals will fit anything else.
Quote
Share

Joined: September 22nd, 2008, 11:40 pm

March 24th, 2012, 2:38 am #5

Damn. I was hoping at least the spring would.
Quote
Share

Joined: March 3rd, 2005, 1:38 pm

March 24th, 2012, 11:02 am #6

and doesn't cost an arm and a leg if you do a swap, send yours in and get a new one in return...

mailto:flyingdragonairrifles@hotmail.com Flying Dragon Air Rifles 515-924-3699
Quote
Share

Joined: October 2nd, 2009, 10:15 pm

March 24th, 2012, 1:21 pm #7

Damn. I was hoping at least the spring would.
Well the spring might fit something. But I always thought a B30 was a nice gun. If you want to sell it at a low price I might be interested as the trigger group is very easy and inexpensive to replace.
Quote
Share

Joined: September 22nd, 2008, 11:40 pm

March 25th, 2012, 10:20 am #8

Thats for sure, Don't know what it could be but it can be repaired...Flying Dragon has the parts if you know what you need otherwise it will have to be sent in for repair...

mailto:flyingdragonairrifles@hotmail.com Flying Dragon Air Rifles 515-924-3699
One of the ears on the trigger spring somehow came off the face of the trigger and was pointing straight back into the safety. When I would push the safety the spring half was moving the trigger enough to fire the sear. One half of the spring was still functioning and pushing the trigger so I didn't catch it. I charged the gun and rough housed it, dropped it and beat it around with a mallet for a while on both safe and fire and it all looks good!
Quote
Share

Joined: March 3rd, 2005, 1:38 pm

March 26th, 2012, 1:44 pm #9

Once in awhile we lucky....

mailto:flyingdragonairrifles@hotmail.com Flying Dragon Air Rifles 515-924-3699
Quote
Share