CAREER 707 SPARES!!!!!

CAREER 707 SPARES!!!!!

Joined: February 1st, 2004, 4:31 am

January 20th, 2007, 8:14 pm #1

I need some spares for my career 707. Stored charged at 2000psi by 1 month without use and the valve oring lost its form. After umount it, i damaged a little the anodized black alu.

Contacted Tim, and he offer me some sumatra valves that fix the psi store issue. May be shortened for a correct fit.

The problem now is that nobody can supply the damaged anodized parts (two retaining rings, etc). I tried BAR (lloyd from Black Pool, Tim, Pyramid Air, straight shootes, ShingSung...). Chambersgunmakers have one retaining ring, but i need 2 and due the death of the original owner only can dispatch pieces in the present stock.

So...ANYONE KNOW WHERE CAN ORDER CAREER 707 SPARES?.

Thanks a lot and my apologies for my bad english, xD.

Reply
Share

Joined: December 28th, 2002, 2:40 am

January 21st, 2007, 2:04 am #2

Aluminum Black from Brownells. Unless you really buggered it good you should be able to touch it up and not have it look too bad. Here's a link.
http://www.brownells.com/aspx/ns/store/ ... INUM+BLACK
Reply
Share

Joined: July 19th, 2003, 12:46 pm

January 21st, 2007, 4:01 am #3

I need some spares for my career 707. Stored charged at 2000psi by 1 month without use and the valve oring lost its form. After umount it, i damaged a little the anodized black alu.

Contacted Tim, and he offer me some sumatra valves that fix the psi store issue. May be shortened for a correct fit.

The problem now is that nobody can supply the damaged anodized parts (two retaining rings, etc). I tried BAR (lloyd from Black Pool, Tim, Pyramid Air, straight shootes, ShingSung...). Chambersgunmakers have one retaining ring, but i need 2 and due the death of the original owner only can dispatch pieces in the present stock.

So...ANYONE KNOW WHERE CAN ORDER CAREER 707 SPARES?.

Thanks a lot and my apologies for my bad english, xD.

go to gun broker or auction arms and find gusto.

This guy may have what you need.

Dutch

HeheheheHehehehHeehehehe

And aaain't it grrreaaat to be livinnn in the USA.

I never whacked a pigeon, starling, or sparrow that didn't deserve it!!!

1278 and countin....on pigeons..
Reply
Share

Joined: November 21st, 2001, 7:55 am

January 21st, 2007, 8:51 am #4

I need some spares for my career 707. Stored charged at 2000psi by 1 month without use and the valve oring lost its form. After umount it, i damaged a little the anodized black alu.

Contacted Tim, and he offer me some sumatra valves that fix the psi store issue. May be shortened for a correct fit.

The problem now is that nobody can supply the damaged anodized parts (two retaining rings, etc). I tried BAR (lloyd from Black Pool, Tim, Pyramid Air, straight shootes, ShingSung...). Chambersgunmakers have one retaining ring, but i need 2 and due the death of the original owner only can dispatch pieces in the present stock.

So...ANYONE KNOW WHERE CAN ORDER CAREER 707 SPARES?.

Thanks a lot and my apologies for my bad english, xD.

always stored them filled, sometimes up to 3000 psi.
Why at 2000 psi would things go to hell?
From what I've read here you're supposed to store them full or partially so.
Am I missing something?
Reply
Share

Joined: December 9th, 2005, 7:18 am

January 22nd, 2007, 8:53 am #5

and the seals on the intake valve went to "hell" after a couple of months as you would said
the guns were filled to about 3000 psi
now i got four pairs of spare seals , just in case they start leaking again
Last edited by miha_b on January 22nd, 2007, 8:57 am, edited 1 time in total.
Reply
Share

Joined: December 9th, 2005, 7:18 am

January 22nd, 2007, 9:29 am #6

I need some spares for my career 707. Stored charged at 2000psi by 1 month without use and the valve oring lost its form. After umount it, i damaged a little the anodized black alu.

Contacted Tim, and he offer me some sumatra valves that fix the psi store issue. May be shortened for a correct fit.

The problem now is that nobody can supply the damaged anodized parts (two retaining rings, etc). I tried BAR (lloyd from Black Pool, Tim, Pyramid Air, straight shootes, ShingSung...). Chambersgunmakers have one retaining ring, but i need 2 and due the death of the original owner only can dispatch pieces in the present stock.

So...ANYONE KNOW WHERE CAN ORDER CAREER 707 SPARES?.

Thanks a lot and my apologies for my bad english, xD.

try this site http://www.qsa-trading.nl/
they are importing shinsung rifles among others
it is best to call them or send them a fax, it takes long for them to respond to email

you can also try

http://www.targetmaster.nl/ , and send them a mail..

both are in the Netherlands

good luck ( i also had no luck with lloyd from Black Pool, Tim, Pyramid Air, ShingSung ), but Tim gave me some good advice
Reply
Share