Anyone know where to buy a comma pointer?

Anyone know where to buy a comma pointer?

Joined: June 8th, 2014, 9:45 pm

October 3rd, 2017, 12:18 am #1

I purchased one from this forum a year or so ago but can't remember who made it for me. It was printed from one of those plastic printers. Rowan doesn't appear to have them and I didn't see any on Eric sanders site. I was thinking they may come with the comma but apparently that isn't the case.
Reply
Share

Joined: January 3rd, 2006, 2:12 am

October 3rd, 2017, 3:01 am #2

Bill,

I got one from Eric sanders at Scope Werks.

Pat
Reply
Share

Joined: February 23rd, 2015, 1:44 am

October 3rd, 2017, 9:44 am #3

I purchased one from this forum a year or so ago but can't remember who made it for me. It was printed from one of those plastic printers. Rowan doesn't appear to have them and I didn't see any on Eric sanders site. I was thinking they may come with the comma but apparently that isn't the case.
is out if Air gunning now. I suggest you call Eric Sanders at Scope Werkes. Or email him about one.

You can also make one from a thin piece of aluminum and put it between the rear scope rings. Clamping it down in-between the top and bottom. A simple "T" shape is all you need. I have done this before I got one from Daniel. Works fine....
Reply
Share

Joined: October 18th, 2014, 12:45 am

October 3rd, 2017, 11:09 am #4

I purchased one from this forum a year or so ago but can't remember who made it for me. It was printed from one of those plastic printers. Rowan doesn't appear to have them and I didn't see any on Eric sanders site. I was thinking they may come with the comma but apparently that isn't the case.
Bill,

I also bought a pointer from Daniel. I wanted to buy another and found the linear pointer.
I think Daniel copied their design and made some improvements.
Here is the link
https://www.maestro-design.co.uk/produc ... ointer/?at
Approximately $53 converted from British pounds.

Regards,
Leo
Last edited by gonzav71 on October 3rd, 2017, 11:19 am, edited 1 time in total.
Reply
Share

Joined: May 14th, 2004, 4:11 pm

October 3rd, 2017, 4:39 pm #5

I purchased one from this forum a year or so ago but can't remember who made it for me. It was printed from one of those plastic printers. Rowan doesn't appear to have them and I didn't see any on Eric sanders site. I was thinking they may come with the comma but apparently that isn't the case.
bill.rabbitt@gmail.com
Reply
Share

Joined: January 3rd, 2006, 2:12 am

October 3rd, 2017, 7:07 pm #6

Bill Rabbitt does make some nice pieces I recently got a scope wheel from him that works really good.

Pat
Reply
Share

Joined: June 8th, 2014, 9:45 pm

October 3rd, 2017, 8:50 pm #7

I purchased one from this forum a year or so ago but can't remember who made it for me. It was printed from one of those plastic printers. Rowan doesn't appear to have them and I didn't see any on Eric sanders site. I was thinking they may come with the comma but apparently that isn't the case.
I greatly appreciate it. John Erol had a extra one like the one I ready have so I'm am going to purchase it from him. The FT forum is a excellent source to find answers for our Airgun questions. I'm surprised Eric is not advertising his pointers. The Comma I just purchased was from Eric and I searched his web site for them before I enquired here. Again, Thanks!
Last edited by dayjd2 on October 3rd, 2017, 8:51 pm, edited 1 time in total.
Reply
Share

Joined: October 21st, 2008, 9:13 pm

October 4th, 2017, 3:18 pm #8

I purchased one from this forum a year or so ago but can't remember who made it for me. It was printed from one of those plastic printers. Rowan doesn't appear to have them and I didn't see any on Eric sanders site. I was thinking they may come with the comma but apparently that isn't the case.
selected the right thickness and clamped in the rear scope ring. works fine. I cut it to shape on a bench grinder and use gun blue to make it black and filed the edge so he edge is bright. It is important to get the thickness right for obvious reasons. You will have to cut screw releife indents in the edge that goes agains the mount screws to get it ti "nest" properly.
Reply
Share

Joined: October 10th, 2015, 2:55 pm

October 7th, 2017, 1:54 pm #9

I greatly appreciate it. John Erol had a extra one like the one I ready have so I'm am going to purchase it from him. The FT forum is a excellent source to find answers for our Airgun questions. I'm surprised Eric is not advertising his pointers. The Comma I just purchased was from Eric and I searched his web site for them before I enquired here. Again, Thanks!
I have a section dedicated to pointers on my website. They are universal as they can be used both for comma/eccentric wheels as well as round wheels and turrets. The taller, (.390" from tube to pointer), is normally what is used.
Reply
Share