Airmax pistol stock

Airmax pistol stock

Joined: April 19th, 2015, 2:09 am

January 11th, 2018, 5:08 pm #1

This thread was asking about a possible stock for an Mrodair Airmax pistol
stock.

http://www.network54.com/Forum/79537/me ... ax+pistol-

Gubb33ps had an excellent suggestion basing it on a Crosman 13XX stock.
I thought I would try it out. Works great!

Sorry for photo links. Wouldn't load them right.

https://imageshack.com/a/img923/1566/iDolv4.png

Finished gun is light and easy to shoulder.

https://imageshack.com/a/img922/2751/HYPC3E.png

After cutting the stock I used a drill with a 1/2 inch sanding drum
to bevel the stock to fit closer to the grip. I then used this product
to seal and glue the grip to the stock. It's a firm putty that you can
work with a Popsicle stick. Sets quickly.

https://imageshack.com/a/img924/3738/gL3gpA.jpg

Little semi-gloss black paint to hide the off white of the putty and
the cosmetics are taken care of.

https://imageshack.com/a/img922/5820/DMy1lA.jpg

I opted to just use a longer grip screw to hold the assembly to the gun.
A 60mm long 5mm 8 screw worked great. I'd put putty on the base of the
grip so it doesn't twist so one screw is enough. Removes just like the
factory if I want to go back to a pistol. Ordered a grip from Mrod.

https://imageshack.com/a/img924/4908/Q6r4Sp.jpg

This was standing gun rested on a window sill at 19 yards. 4 shots.
I was afraid a fifth shot would blow my grouping. JSB 15.89

https://imageshack.com/a/img922/7796/nQVFiF.jpg

Thanks Gubb and Yellow for posting great information and ideas for us all!
Reply
Share

Joined: April 28th, 2010, 12:23 am

January 11th, 2018, 5:20 pm #2

I like it.. I think that gun is an ideal platform for a small carbine
Reply
Share

Joined: November 17th, 2006, 3:51 am

January 11th, 2018, 10:52 pm #3

This thread was asking about a possible stock for an Mrodair Airmax pistol
stock.

http://www.network54.com/Forum/79537/me ... ax+pistol-

Gubb33ps had an excellent suggestion basing it on a Crosman 13XX stock.
I thought I would try it out. Works great!

Sorry for photo links. Wouldn't load them right.

https://imageshack.com/a/img923/1566/iDolv4.png

Finished gun is light and easy to shoulder.

https://imageshack.com/a/img922/2751/HYPC3E.png

After cutting the stock I used a drill with a 1/2 inch sanding drum
to bevel the stock to fit closer to the grip. I then used this product
to seal and glue the grip to the stock. It's a firm putty that you can
work with a Popsicle stick. Sets quickly.

https://imageshack.com/a/img924/3738/gL3gpA.jpg

Little semi-gloss black paint to hide the off white of the putty and
the cosmetics are taken care of.

https://imageshack.com/a/img922/5820/DMy1lA.jpg

I opted to just use a longer grip screw to hold the assembly to the gun.
A 60mm long 5mm 8 screw worked great. I'd put putty on the base of the
grip so it doesn't twist so one screw is enough. Removes just like the
factory if I want to go back to a pistol. Ordered a grip from Mrod.

https://imageshack.com/a/img924/4908/Q6r4Sp.jpg

This was standing gun rested on a window sill at 19 yards. 4 shots.
I was afraid a fifth shot would blow my grouping. JSB 15.89

https://imageshack.com/a/img922/7796/nQVFiF.jpg

Thanks Gubb and Yellow for posting great information and ideas for us all!
Am keeping my little hill-billy converted one just the way it is:



Can offer advice.


MkI or MKII, the grip is mostly a hollow plastic shell.

If you ant to attach somthing to theat hollow shell with screw, better to fill some of the hollow spaces with something tough to give the screws something to "bite" into other than the shell.

Get the "cheek" right with your face vs. the scope


At least n theMK I's round shroud, a one piece mount can slide forward to give eye relief and a firm clamp to the grooves without tocuching the round shroud.
Reply
Share

Joined: November 17th, 2006, 3:51 am

January 11th, 2018, 10:53 pm #4

This thread was asking about a possible stock for an Mrodair Airmax pistol
stock.

http://www.network54.com/Forum/79537/me ... ax+pistol-

Gubb33ps had an excellent suggestion basing it on a Crosman 13XX stock.
I thought I would try it out. Works great!

Sorry for photo links. Wouldn't load them right.

https://imageshack.com/a/img923/1566/iDolv4.png

Finished gun is light and easy to shoulder.

https://imageshack.com/a/img922/2751/HYPC3E.png

After cutting the stock I used a drill with a 1/2 inch sanding drum
to bevel the stock to fit closer to the grip. I then used this product
to seal and glue the grip to the stock. It's a firm putty that you can
work with a Popsicle stick. Sets quickly.

https://imageshack.com/a/img924/3738/gL3gpA.jpg

Little semi-gloss black paint to hide the off white of the putty and
the cosmetics are taken care of.

https://imageshack.com/a/img922/5820/DMy1lA.jpg

I opted to just use a longer grip screw to hold the assembly to the gun.
A 60mm long 5mm 8 screw worked great. I'd put putty on the base of the
grip so it doesn't twist so one screw is enough. Removes just like the
factory if I want to go back to a pistol. Ordered a grip from Mrod.

https://imageshack.com/a/img924/4908/Q6r4Sp.jpg

This was standing gun rested on a window sill at 19 yards. 4 shots.
I was afraid a fifth shot would blow my grouping. JSB 15.89

https://imageshack.com/a/img922/7796/nQVFiF.jpg

Thanks Gubb and Yellow for posting great information and ideas for us all!
,,,,
Last edited by gubb33ps on January 11th, 2018, 11:48 pm, edited 1 time in total.
Reply
Share