55 E 12 wheels needed

55 E 12 wheels needed

Joined: January 29th, 2016, 2:33 am

June 9th, 2017, 2:16 am #1

I may have pursued this last year .. I am searching for Wheels for my 1955 E12 3/4 ton. I have 17.5 inch on front and 16 inch split rims on rear. I plan on having some 16 inch Tubless Steel wheels made but I will be in need of spares to do this. I am slao not 100% sure of the bolt pattern .I believe I measured it as a 6 on 7 pattern but I keep seeing only 6 on 7.25 pattern. All help greatly appreciated . I am also willing to travel for these wheels.



Reply
Like
Share

Joined: November 7th, 2016, 5:17 pm

June 9th, 2017, 5:56 am #2

I have some wheels that i can cut centers out and mail, have done this in the past. cut out close to the rim and wheel company can trim and put in 16 drop center wheel. send email if you have any questions vern@nvt.net
Reply
Like
Share

Joined: October 16th, 2014, 12:36 am

June 9th, 2017, 3:32 pm #3

I may have pursued this last year .. I am searching for Wheels for my 1955 E12 3/4 ton. I have 17.5 inch on front and 16 inch split rims on rear. I plan on having some 16 inch Tubless Steel wheels made but I will be in need of spares to do this. I am slao not 100% sure of the bolt pattern .I believe I measured it as a 6 on 7 pattern but I keep seeing only 6 on 7.25 pattern. All help greatly appreciated . I am also willing to travel for these wheels.



Near Lumberton, NC

Studebaker front and rear axles
Bladenboro, NC
$300
Studebaker front and rear axles for ton and a half truck. $300 negotiable

Thomas Speight, Butters, NC

https://scontent-atl3-1.xx.fbcdn.net/v/ ... e=59DA39FE
Reply
Like
Share

Joined: January 29th, 2016, 2:33 am

June 15th, 2017, 1:49 pm #4

A ton and Half is much bigger than a 3/4 ton. also looks as if the wheels have much deeper backspace as mine are fairly flush as you can see in pictures. but thank you
Reply
Like
Share