9mm loads for accuracy

9mm loads for accuracy

Joined: June 19th, 2016, 9:39 pm

November 11th, 2017, 2:00 pm #1

Hi

I've used a few loads for 9mm, including the 4.5 N340, H&N HP load and also use Magtech 115 HP factory rounds which I find good.

What are your favourites?
Quote
Like
Share

Joined: January 22nd, 2012, 7:12 pm

November 12th, 2017, 2:26 am #2

4.9 gr WSF, 115 HAP, coal 1.080
5.1 gr Silhouette, 115 HAP, coal 1.080
Quote
Like
Share

Joined: January 22nd, 2012, 7:12 pm

November 12th, 2017, 2:28 am #3

in a S.A 1911 with Nowlin barrel, 5" unknown twist (probably 1:16)
Quote
Like
Share

Joined: August 21st, 2013, 3:31 pm

November 12th, 2017, 4:42 pm #4

I have found 4.0- 4.2 CFE pistol powder,seat oal 1.142 and crimped .377 at mouth with WW 115 jhp good load out of PPC9. Use same case headstamps and not nickl.
Quote
Like
Share

Joined: June 19th, 2016, 9:39 pm

November 12th, 2017, 6:30 pm #5

Thanks guys.

I'm going to try and work up some loads when I get my ransom rest issue sorted.
Quote
Like
Share

Joined: July 2nd, 2014, 2:27 pm

November 16th, 2017, 3:45 pm #6

I think all the loads that were suggested were using powders not readily available in Ireland, so I would suggest you try Vihtavouri VV330 or VV340. Usually starting around 4.8 gr. using a 115gr bullet.
Quote
Like
Share