Lady with a fan (3d sketch for woodcarving)

railgun
Registered User
railgun
Registered User
Joined: 11:55 AM - Dec 03, 2009

12:33 PM - Dec 19, 2017 #1

I've recently made a 3d sketch for my new woodcarving/ sketch is ready. that's how it looks. Now i'm trying to find good wood for this project. I don't know about color scheme yet.
natural wood color (one or two) оr acrylic paint. all comments are welcome(positive or negative):)))
DSCF2485_3.jpg DSCF2485_1.jpg
Quote
Like
Share

Brian T
Registered User
Brian T
Registered User
Joined: 12:27 AM - Apr 24, 2015

10:52 PM - Dec 19, 2017 #2

I like it.  I've been wood carving for quite a while.  I see very little detail so you ought to be able to work in clear,
straight-grained conifer wood.  I like your model.  I can see that you've already had the chance to think out some of the 3D challenges.

You asked for 2 colors. 
a)  I say use pine or yellow cedar for the pale wood.
It cuts easily and carves easily.  Splits easily so don't push detail you don't need.
b) I say use western red cedar or eastern red cedar for the dark wood.  Ditto details.
= = =
Take a 6" ruler with you when you go looking for wood.
Obviously clear/knot free and straight grained will be easier to work than burl.
Maybe you find pieces with knots that you can work into your design = make 2 of them.

What you must do is measure the ring count per inch.  Big deal in conifer carving wood.
You're looking for 15-30 rings per inch.  Less is crushing punky.  More than 40 is kind of boney but carvable.
I have seen some fabulous western red cedar fence boards but 10 rings/inch.  Keep walking.
I've been known to carve a fence post or two.
= = =
Assembly:  those drywall screws just gotta go!!!
Dowel pegs are all fairly fat.  I use pieces of round bamboo BBQ skewers of different diameters.
Right up to cheap chop sticks.

Looking forward to the result.
Quote
Like
Share

Michael Bootz
Registered User
Michael Bootz
Registered User
Joined: 4:23 PM - Sep 21, 2007

4:12 PM - Dec 22, 2017 #3

I like it, too. Looks very modern and at the same time some of the shapes remind me of paleolithic venus figurines (not sure if that was intentional?).
Personally, I would go with natural wood colors rather than use acrylic paints, or stain the wood with natural pigments.
Quote
Like
Share

Quillsnkiko
Registered User
Quillsnkiko
Registered User
Joined: 8:25 AM - Jun 22, 2006

5:04 AM - Dec 23, 2017 #4

LOL!~! I'll let the guys imaginations rule here. Quills😇
" You can't stop the waves .... but, you can learn to surf."
Quote
Like
Share

railgun
Registered User
railgun
Registered User
Joined: 11:55 AM - Dec 03, 2009

1:44 PM - Jan 12, 2018 #5

Robson Valley wrote: I like it.  I've been wood carving for quite a while.  I see very little detail so you ought to be able to work in clear,
straight-grained conifer wood.  I like your model.  I can see that you've already had the chance to think out some of the 3D challenges.

You asked for 2 colors. 
a)  I say use pine or yellow cedar for the pale wood.
It cuts easily and carves easily.  Splits easily so don't push detail you don't need.
b) I say use western red cedar or eastern red cedar for the dark wood.  Ditto details.
= = =
Take a 6" ruler with you when you go looking for wood.
Obviously clear/knot free and straight grained will be easier to work than burl.
Maybe you find pieces with knots that you can work into your design = make 2 of them.

What you must do is measure the ring count per inch.  Big deal in conifer carving wood.
You're looking for 15-30 rings per inch.  Less is crushing punky.  More than 40 is kind of boney but carvable.
I have seen some fabulous western red cedar fence boards but 10 rings/inch.  Keep walking.
I've been known to carve a fence post or two.
= = =
Assembly:  those drywall screws just gotta go!!!
Dowel pegs are all fairly fat.  I use pieces of round bamboo BBQ skewers of different diameters.
Right up to cheap chop sticks.

Looking forward to the result.
thx a lot Robson Valley
yes I'll definitely remove screws! Great idea about bamboo BBQ skewers!
I'll show how it will look!
Quote
Like
Share

railgun
Registered User
railgun
Registered User
Joined: 11:55 AM - Dec 03, 2009

1:46 PM - Jan 12, 2018 #6

Quillsnkiko wrote: LOL!~! I'll let the guys imaginations rule here. Quills😇
:))) I'll try to be good!
Quote
Like
Share

railgun
Registered User
railgun
Registered User
Joined: 11:55 AM - Dec 03, 2009

9:27 AM - Feb 13, 2018 #7

Michael Bootz wrote: I like it, too. Looks very modern and at the same time some of the shapes remind me of paleolithic venus figurines (not sure if that was intentional?).
Personally, I would go with natural wood colors rather than use acrylic paints, or stain the wood with natural pigments.
Really Michael, it reminds paleolithic Venuses , no i didn't have any intention for it. May be it was just my subconscious:)
yes i didn't paint it so far. thx again for your comment!
Quote
Like
Share

ateyo
Registered User
ateyo
Registered User
Joined: 9:30 PM - Dec 11, 2014

9:11 PM - Feb 13, 2018 #8

railgun wrote:I've recently made a 3d sketch for my new woodcarving/ sketch is ready. that's how it looks. Now i'm trying to find good wood for this project. I don't know about color scheme yet.
natural wood color (one or two) оr acrylic paint. all comments are welcome(positive or negative):)))
DSCF2485_3.jpgDSCF2485_1.jpg
Wooden dowels please! And yes, use natural wood colors or stains. I think she is marvelous!

Sent from my SM-T350 using Tapatalk

Quote
Like
Share

railgun
Registered User
railgun
Registered User
Joined: 11:55 AM - Dec 03, 2009

12:02 PM - Feb 19, 2018 #9

ateyo wrote:Thx a lot, Ateyo!
railgun wrote:I've recently made a 3d sketch for my new woodcarving/ sketch is ready. that's how it looks. Now i'm trying to find good wood for this project. I don't know about color scheme yet.
natural wood color (one or two) оr acrylic paint. all comments are welcome(positive or negative):)))
DSCF2485_3.jpgDSCF2485_1.jpg
Wooden dowels please!  And yes, use natural wood colors or stains.  I think she is marvelous!

Sent from my SM-T350 using Tapatalk
Quote
Like
Share