ACHOSE BRACKET

Iconn
Elite Member
Joined: April 18th, 2015, 9:11 pm

May 15th, 2018, 10:12 pm #1

:rocker :type :smackface HI all. I am on the final lap to get this engine back in "green" 1996. The evaporator that I ordered has a built in tubing adapter and so you do not need the one that came on the original evaporator. It has to mount onto the radiator cross member at the top somewhere to prohibit vibration damage. Here is a pix of the problem. Has anyone ran into this problem? Do I need to re-fabricate the bracket?
https://www.dropbox.com/s/rbxrzfe8zksp5 ... T.jpg?dl=0

Thanks! :deal
Quote
Like
Share

smysmbrg
Elite Member
Joined: November 9th, 2012, 3:42 am

May 17th, 2018, 7:45 pm #2

My 97 has a replacement condenser and this is how they mounted the bracket holding the line in front. Not sure if this is what you are talking about.




Quote
Like
Share

Iconn
Elite Member
Joined: April 18th, 2015, 9:11 pm

May 19th, 2018, 8:54 pm #3

! oh so it does mount. That sticks way out there! I made a "kinked" bracket so that it partially hides back behind the crossmember. Now I know! Thanks
Quote
Like
Share