Brewster Buffalo from Mark 1 in 1/144 scale

Joined: November 19th, 2012, 1:28 pm

September 9th, 2018, 11:00 pm #1

Hi Guys,
This seems to be a lovely twin kit from Mark 1 models. As I have two kits I have decided to do a combined build of both kits. I'm not sure yet which one of the British ones that I eventually plum for, not that it will make any difference as both finishes are the same. It will be just a matter of which squadron I choose. The second choice will be the Japanese one for the Captured GB! This is working out very handy!
I used Gerry Doyle's recently finished Buffalo in Finnish markings as an guide, thanks Gerry! ūüėá

IMG_20180909_232102 by Joseph Moran, on Flickr
IMG_20180909_232112 by Joseph Moran, on Flickr

No you're not seeing double, just double jobbing on the kits. ūü§ď¬†Side walls painted and instrument painted.
IMG_20180909_000127 by Joseph Moran, on Flickr

Close up of instrument panel.
IMG_20180909_000314 by Joseph Moran, on Flickr

Next to cut some seat belts for the seat but that's tomorrows work!
Cheers
Guys
Joe M
And not a Stick or String in sight!
On the bench in order of nearest to completion;
A Z Models 1/72 Morane "WR". (Schneider race entry from 1914).
SRAM Models 1/144 SIA 7-B (Resin)
Valom Models 1144 A pair of Sopwith Pups
MSD Models 1/72 Vickers Vimy 66 Commercial
Revell 1/72 Fokker D.VII conversion to a two seater
Curtiss Condor (added 24/4/18) 1/81




Quote
Like
Share

Joined: November 19th, 2012, 1:28 pm

September 10th, 2018, 11:00 pm #2

Hi Guys,.
Got a little done today but was side tracked for a lot of the time.
First of all the side tracking. Our plum tree produced a reasonable crop and this was the result.


I managed to get the seats installed and the belts, so nearly ready to join the fuselage halves together and then attach to the wing!
IMG_20180910_165719 by Joseph Moran, on Flickr
IMG_20180910_165654 by Joseph Moran, on Flickr
IMG_20180910_165621 by Joseph Moran, on Flickr
So far both kits, this one and the one for the RAF Centenary GB are exactly the same, well more or less.
Thanks for looking.
Cheers
Joe M
On the bench in order of nearest to completion;
A Z Models 1/72 Morane "WR". (Schneider race entry from 1914).
SRAM Models 1/144 SIA 7-B (Resin)
Valom Models 1144 A pair of Sopwith Pups
MSD Models 1/72 Vickers Vimy 66 Commercial
Revell 1/72 Fokker D.VII conversion to a two seater
Curtiss Condor (added 24/4/18) 1/81




Quote
Like
Share

Joined: June 6th, 2017, 11:19 am

September 11th, 2018, 7:41 am #3

Mmm plum jam. The Buffalo's good too. I have a glut of giant (8kg no less for the largest one) courgettes that I keep meaning to pickle, may get to them this weekend.
Quote
Like
Share

Joined: December 14th, 2016, 12:55 pm

September 11th, 2018, 8:17 am #4

Nice one Joe. A jar each at the next club meeting so? ;)
Glen

On the bench:
1/35 Revell Dingo GE A3.3 PatSi (mine protected APC)
1/16 Trumpeter T-72B1 with Kontakt ERA
1/35 AML-30 prototype
1/35 Djibouti BTR-60 with AML-90 turret
1/72 S-Models BMD w/scratch slat armour.
And about 100 other part built kits... ;)


"The sergeant is the Army." Dwight D. Eisenhower
Quote
Like
Share

Joined: November 19th, 2012, 1:28 pm

September 11th, 2018, 10:05 pm #5

Joseph M
Joined: 19 Nov 2012, 13:28
    • Report this post
less than a minute ago #5 2018-09-11T22:04
Seeing as my jam making was finished I got another bit done today.
Initially I got both fuselage halves together and once dry I managed to get the tail feathers in place as well.
Tomorrow I'll try and get the engine and cowling in place and if time permits I'll go for the cockpits as well.
Thanks for looking guys.
Cheers
Joe M
And not a single stick or string in place.
IMG_20180910_192627 by Joseph Moran, on Flickr
IMG_20180910_192644 by Joseph Moran, on Flickr

And then the tail feathers!
IMG_20180911_160231 by Joseph Moran, on Flickr
IMG_20180911_160300
On the bench in order of nearest to completion;
A Z Models 1/72 Morane "WR". (Schneider race entry from 1914).
SRAM Models 1/144 SIA 7-B (Resin)
Valom Models 1144 A pair of Sopwith Pups
MSD Models 1/72 Vickers Vimy 66 Commercial
Revell 1/72 Fokker D.VII conversion to a two seater
Curtiss Condor (added 24/4/18) 1/81




Quote
Like
Share

Joined: June 6th, 2017, 11:19 am

September 12th, 2018, 7:13 am #6

As usual lovely work Joe.  They must be tiny. Such a cute little airplane definitely have to get one into my collection.
Quote
Like
Share

Joined: November 19th, 2012, 1:28 pm

September 13th, 2018, 10:20 pm #7

Joseph M  
Joined: 19 Nov 2012, 13:28
    • Report this post
2 minutes ago #6 2018-09-13T22:16
hi Guys,
Didn't get enough done yesterday to bother posting but caught up a bit today. The kits are beginning to get separated as painting time is getting near (I hope)!

Engines painted and installed.
IMG_20180913_153939 by Joseph Moran, on Flickr
IMG_20180913_153953 by Joseph Moran, on Flickr
IMG_20180913_154011 by Joseph Moran, on Flickr

Engine Cowling in-place. The cooling slots were supposed to be open but there was flash on both the upper and lower slots so I cleaned them up a bit.
IMG_20180913_154630 by Joseph Moran, on Flickr

The only way I can tell the difference between the two of them is by looking carefully at the seat belts (Tamiya tape) as they are slightly different.
IMG_20180913_154752 by Joseph Moran, on Flickr
IMG_20180913_154809 by Joseph Moran, on Flickr

Tomorrow I hope to get the upper and lower cockpit glazing in place. The upper cockpit fits grand but I had a bit of work to do to get the bottom to fit. At the moment they are not fixed in place as first I want to give them a bit of a clean, slap some future on them and let them dry over night.
IMG_20180913_163531 by Joseph Moran, on Flickr
Then the fun part will be masking off the cockpits above and below.

Cheers
Joe M
And not a Stick or String in placed.  
On the bench in order of nearest to completion;
A Z Models 1/72 Morane "WR". (Schneider race entry from 1914).
SRAM Models 1/144 SIA 7-B (Resin)
Valom Models 1144 A pair of Sopwith Pups
MSD Models 1/72 Vickers Vimy 66 Commercial
Revell 1/72 Fokker D.VII conversion to a two seater
Curtiss Condor (added 24/4/18) 1/81




Quote
Like
Share

Joined: November 19th, 2012, 1:28 pm

September 14th, 2018, 3:50 pm #8

Hi Guys,
Its time to begin separating the twins! Not fully separated yet but getting there.
The yellow tipped propeller will be the British one as the Japanese one was all black.
IMG_20180914_110649 by Joseph Moran, on Flickr
 Yellow tipped prop = English.
IMG_20180914_110701 by Joseph Moran, on Flickr

Even with a mask it took a while to get this done
IMG_20180914_113151 by Joseph Moran, on Flickr

Cheers
Joe M
And not a Stick or String in sight!!
On the bench in order of nearest to completion;
A Z Models 1/72 Morane "WR". (Schneider race entry from 1914).
SRAM Models 1/144 SIA 7-B (Resin)
Valom Models 1144 A pair of Sopwith Pups
MSD Models 1/72 Vickers Vimy 66 Commercial
Revell 1/72 Fokker D.VII conversion to a two seater
Curtiss Condor (added 24/4/18) 1/81




Quote
Like
Share

Joined: November 19th, 2012, 1:28 pm

September 20th, 2018, 4:16 pm #9

Getting there with this one.
Upper surfaces painted.
IMG_20180920_163927 by Joseph Moran, on Flickr

Under surfaces of this one are black and white. Need to mask it off for the black.
IMG_20180920_164003 by Joseph Moran, on Flickr

Cheers Guys
Joe M
And not a Stick or String in sight.
On the bench in order of nearest to completion;
A Z Models 1/72 Morane "WR". (Schneider race entry from 1914).
SRAM Models 1/144 SIA 7-B (Resin)
Valom Models 1144 A pair of Sopwith Pups
MSD Models 1/72 Vickers Vimy 66 Commercial
Revell 1/72 Fokker D.VII conversion to a two seater
Curtiss Condor (added 24/4/18) 1/81




Quote
Like
Share

Joined: November 19th, 2012, 1:28 pm

September 21st, 2018, 4:02 pm #10

Like Brexit this British Buffalo is proving to be bothersome!

All looks O.K.
IMG_20180921_163254 by Joseph Moran, on Flickr

But earlier when I sprayed the white this is what I found when I removed the masking tape.
This side doesn't look to bad .............
IMG_20180921_141311 by Joseph Moran, on Flickr

But the other side..........
IMG_20180921_141331 by Joseph Moran, on Flickr

Spent a fair bit of time today trying to sort it out and I'm back to this!
IMG_20180921_163217 by Joseph Moran, on Flickr

Cheers Guys
Joe M
And not a Stick or String in sight.
On the bench in order of nearest to completion;
A Z Models 1/72 Morane "WR". (Schneider race entry from 1914).
SRAM Models 1/144 SIA 7-B (Resin)
Valom Models 1144 A pair of Sopwith Pups
MSD Models 1/72 Vickers Vimy 66 Commercial
Revell 1/72 Fokker D.VII conversion to a two seater
Curtiss Condor (added 24/4/18) 1/81




Quote
Like
Share