One hungry hangar (wip 16)

.

One hungry hangar (wip 16)

Joined: May 31st, 2009, 6:11 pm

May 9th, 2012, 12:14 am #1

Hello guys,
Back to my project and the hangar which has been asking for more and more detailing..

To start with,I didn't like the exterior look of it

[/IMG]

so back to the start...

[/IMG]

[/IMG]

[/IMG]

some patches with Humbrol 96

[/IMG]

I scratched a tiny part of the roof

[/IMG]

I dry fitted it,( the floor has been primed with grey as you can see),

[/IMG]

I like it more now,..

[/IMG]

time to put each piece in its place

[/IMG]

I drilled more than 150 holes to rivet the corrugated siding

[/IMG]

[/IMG]

I removed the excess

[/IMG]

the windows..

[/IMG]

[/IMG]

[/IMG]

just look at that!!! I should definitely find a way to straighten it!!..

[/IMG]

[/IMG]

sometimes it's ok to have a break and stretch your legs!!!!

[/IMG]

this is part of my modeling lamp! lol!!!

[/IMG]

the door wheels should run on rails, shouldn't it??

[/IMG]

Then comes the floor weathering

[/IMG]

but a black wash revealed nasty scratches on the wooden case..

[/IMG]

so.....guess what!!!!!

[/IMG]

sniffing the dust of a life time!!!

[/IMG]

Here we go again..

[/IMG]

[/IMG]

In the mean time a very good friend of mine painted excellently the nine mechanics who will give you a better look of the hangar size..

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

in case you have forgotten there is a bird unfinished!! lol!

[/IMG]

the floor ready at last..Some oil patches will b added later on..

[/IMG]

Finished?? Not quite!! A good friend told me that the cardboard screen looked like a long luxurious piece of...furniture and on the other hand it coulnt have been standing on its own!!
I sprayed the balsa with lighter tones and had a difficult time adding the metal supports..

[/IMG]

[/IMG]

I'll wash the area and then I'm going to add some wiring throughout as well as some fuse boxes

in their places...

Hope you like my work so far..Any kind of comment welcome..

Cheers,

Panagiotis.



Quote
Like
Share

Joined: October 6th, 2005, 3:26 pm

May 9th, 2012, 12:32 am #2

In the chaos that is going on in Greece you are able to do this kind of work....

I am most impressed............

Andy

If it ain't movin'?.........paint it!!
Quote
Like
Share

Joined: October 30th, 2005, 1:44 pm

May 9th, 2012, 12:41 am #3

Hello guys,
Back to my project and the hangar which has been asking for more and more detailing..

To start with,I didn't like the exterior look of it

[/IMG]

so back to the start...

[/IMG]

[/IMG]

[/IMG]

some patches with Humbrol 96

[/IMG]

I scratched a tiny part of the roof

[/IMG]

I dry fitted it,( the floor has been primed with grey as you can see),

[/IMG]

I like it more now,..

[/IMG]

time to put each piece in its place

[/IMG]

I drilled more than 150 holes to rivet the corrugated siding

[/IMG]

[/IMG]

I removed the excess

[/IMG]

the windows..

[/IMG]

[/IMG]

[/IMG]

just look at that!!! I should definitely find a way to straighten it!!..

[/IMG]

[/IMG]

sometimes it's ok to have a break and stretch your legs!!!!

[/IMG]

this is part of my modeling lamp! lol!!!

[/IMG]

the door wheels should run on rails, shouldn't it??

[/IMG]

Then comes the floor weathering

[/IMG]

but a black wash revealed nasty scratches on the wooden case..

[/IMG]

so.....guess what!!!!!

[/IMG]

sniffing the dust of a life time!!!

[/IMG]

Here we go again..

[/IMG]

[/IMG]

In the mean time a very good friend of mine painted excellently the nine mechanics who will give you a better look of the hangar size..

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

in case you have forgotten there is a bird unfinished!! lol!

[/IMG]

the floor ready at last..Some oil patches will b added later on..

[/IMG]

Finished?? Not quite!! A good friend told me that the cardboard screen looked like a long luxurious piece of...furniture and on the other hand it coulnt have been standing on its own!!
I sprayed the balsa with lighter tones and had a difficult time adding the metal supports..

[/IMG]

[/IMG]

I'll wash the area and then I'm going to add some wiring throughout as well as some fuse boxes

in their places...

Hope you like my work so far..Any kind of comment welcome..

Cheers,

Panagiotis.


I'm amazed by your skill and determination.

Serge Dompierre
Frog and Canuck and proud to be
Quote
Like
Share

Joined: February 27th, 2005, 6:29 am

May 9th, 2012, 2:45 am #4

Hello guys,
Back to my project and the hangar which has been asking for more and more detailing..

To start with,I didn't like the exterior look of it

[/IMG]

so back to the start...

[/IMG]

[/IMG]

[/IMG]

some patches with Humbrol 96

[/IMG]

I scratched a tiny part of the roof

[/IMG]

I dry fitted it,( the floor has been primed with grey as you can see),

[/IMG]

I like it more now,..

[/IMG]

time to put each piece in its place

[/IMG]

I drilled more than 150 holes to rivet the corrugated siding

[/IMG]

[/IMG]

I removed the excess

[/IMG]

the windows..

[/IMG]

[/IMG]

[/IMG]

just look at that!!! I should definitely find a way to straighten it!!..

[/IMG]

[/IMG]

sometimes it's ok to have a break and stretch your legs!!!!

[/IMG]

this is part of my modeling lamp! lol!!!

[/IMG]

the door wheels should run on rails, shouldn't it??

[/IMG]

Then comes the floor weathering

[/IMG]

but a black wash revealed nasty scratches on the wooden case..

[/IMG]

so.....guess what!!!!!

[/IMG]

sniffing the dust of a life time!!!

[/IMG]

Here we go again..

[/IMG]

[/IMG]

In the mean time a very good friend of mine painted excellently the nine mechanics who will give you a better look of the hangar size..

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

in case you have forgotten there is a bird unfinished!! lol!

[/IMG]

the floor ready at last..Some oil patches will b added later on..

[/IMG]

Finished?? Not quite!! A good friend told me that the cardboard screen looked like a long luxurious piece of...furniture and on the other hand it coulnt have been standing on its own!!
I sprayed the balsa with lighter tones and had a difficult time adding the metal supports..

[/IMG]

[/IMG]

I'll wash the area and then I'm going to add some wiring throughout as well as some fuse boxes

in their places...

Hope you like my work so far..Any kind of comment welcome..

Cheers,

Panagiotis.


Remarkable work

David's Model Pages

David's Model Pages on Facebook -https://www.facebook.com/modelscale
Quote
Like
Share

Joined: December 26th, 2005, 9:00 pm

May 9th, 2012, 2:55 am #5

Hello guys,
Back to my project and the hangar which has been asking for more and more detailing..

To start with,I didn't like the exterior look of it

[/IMG]

so back to the start...

[/IMG]

[/IMG]

[/IMG]

some patches with Humbrol 96

[/IMG]

I scratched a tiny part of the roof

[/IMG]

I dry fitted it,( the floor has been primed with grey as you can see),

[/IMG]

I like it more now,..

[/IMG]

time to put each piece in its place

[/IMG]

I drilled more than 150 holes to rivet the corrugated siding

[/IMG]

[/IMG]

I removed the excess

[/IMG]

the windows..

[/IMG]

[/IMG]

[/IMG]

just look at that!!! I should definitely find a way to straighten it!!..

[/IMG]

[/IMG]

sometimes it's ok to have a break and stretch your legs!!!!

[/IMG]

this is part of my modeling lamp! lol!!!

[/IMG]

the door wheels should run on rails, shouldn't it??

[/IMG]

Then comes the floor weathering

[/IMG]

but a black wash revealed nasty scratches on the wooden case..

[/IMG]

so.....guess what!!!!!

[/IMG]

sniffing the dust of a life time!!!

[/IMG]

Here we go again..

[/IMG]

[/IMG]

In the mean time a very good friend of mine painted excellently the nine mechanics who will give you a better look of the hangar size..

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

in case you have forgotten there is a bird unfinished!! lol!

[/IMG]

the floor ready at last..Some oil patches will b added later on..

[/IMG]

Finished?? Not quite!! A good friend told me that the cardboard screen looked like a long luxurious piece of...furniture and on the other hand it coulnt have been standing on its own!!
I sprayed the balsa with lighter tones and had a difficult time adding the metal supports..

[/IMG]

[/IMG]

I'll wash the area and then I'm going to add some wiring throughout as well as some fuse boxes

in their places...

Hope you like my work so far..Any kind of comment welcome..

Cheers,

Panagiotis.


Keep it up my friend,,,,,,, Your doing remarkable work
Quote
Like
Share

Joined: August 4th, 2006, 12:22 am

May 9th, 2012, 4:02 am #6

Hello guys,
Back to my project and the hangar which has been asking for more and more detailing..

To start with,I didn't like the exterior look of it

[/IMG]

so back to the start...

[/IMG]

[/IMG]

[/IMG]

some patches with Humbrol 96

[/IMG]

I scratched a tiny part of the roof

[/IMG]

I dry fitted it,( the floor has been primed with grey as you can see),

[/IMG]

I like it more now,..

[/IMG]

time to put each piece in its place

[/IMG]

I drilled more than 150 holes to rivet the corrugated siding

[/IMG]

[/IMG]

I removed the excess

[/IMG]

the windows..

[/IMG]

[/IMG]

[/IMG]

just look at that!!! I should definitely find a way to straighten it!!..

[/IMG]

[/IMG]

sometimes it's ok to have a break and stretch your legs!!!!

[/IMG]

this is part of my modeling lamp! lol!!!

[/IMG]

the door wheels should run on rails, shouldn't it??

[/IMG]

Then comes the floor weathering

[/IMG]

but a black wash revealed nasty scratches on the wooden case..

[/IMG]

so.....guess what!!!!!

[/IMG]

sniffing the dust of a life time!!!

[/IMG]

Here we go again..

[/IMG]

[/IMG]

In the mean time a very good friend of mine painted excellently the nine mechanics who will give you a better look of the hangar size..

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

in case you have forgotten there is a bird unfinished!! lol!

[/IMG]

the floor ready at last..Some oil patches will b added later on..

[/IMG]

Finished?? Not quite!! A good friend told me that the cardboard screen looked like a long luxurious piece of...furniture and on the other hand it coulnt have been standing on its own!!
I sprayed the balsa with lighter tones and had a difficult time adding the metal supports..

[/IMG]

[/IMG]

I'll wash the area and then I'm going to add some wiring throughout as well as some fuse boxes

in their places...

Hope you like my work so far..Any kind of comment welcome..

Cheers,

Panagiotis.



Quote
Like
Share

Joined: August 27th, 2004, 6:53 pm

May 9th, 2012, 1:26 pm #7

Hello guys,
Back to my project and the hangar which has been asking for more and more detailing..

To start with,I didn't like the exterior look of it

[/IMG]

so back to the start...

[/IMG]

[/IMG]

[/IMG]

some patches with Humbrol 96

[/IMG]

I scratched a tiny part of the roof

[/IMG]

I dry fitted it,( the floor has been primed with grey as you can see),

[/IMG]

I like it more now,..

[/IMG]

time to put each piece in its place

[/IMG]

I drilled more than 150 holes to rivet the corrugated siding

[/IMG]

[/IMG]

I removed the excess

[/IMG]

the windows..

[/IMG]

[/IMG]

[/IMG]

just look at that!!! I should definitely find a way to straighten it!!..

[/IMG]

[/IMG]

sometimes it's ok to have a break and stretch your legs!!!!

[/IMG]

this is part of my modeling lamp! lol!!!

[/IMG]

the door wheels should run on rails, shouldn't it??

[/IMG]

Then comes the floor weathering

[/IMG]

but a black wash revealed nasty scratches on the wooden case..

[/IMG]

so.....guess what!!!!!

[/IMG]

sniffing the dust of a life time!!!

[/IMG]

Here we go again..

[/IMG]

[/IMG]

In the mean time a very good friend of mine painted excellently the nine mechanics who will give you a better look of the hangar size..

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

in case you have forgotten there is a bird unfinished!! lol!

[/IMG]

the floor ready at last..Some oil patches will b added later on..

[/IMG]

Finished?? Not quite!! A good friend told me that the cardboard screen looked like a long luxurious piece of...furniture and on the other hand it coulnt have been standing on its own!!
I sprayed the balsa with lighter tones and had a difficult time adding the metal supports..

[/IMG]

[/IMG]

I'll wash the area and then I'm going to add some wiring throughout as well as some fuse boxes

in their places...

Hope you like my work so far..Any kind of comment welcome..

Cheers,

Panagiotis.


/

"Max Flex" The key to Naval Success
Quote
Like
Share

Joined: May 31st, 2009, 6:11 pm

May 9th, 2012, 8:03 pm #8

Thank you all gentlemen!!
Last edited by gbr-22 on May 9th, 2012, 8:04 pm, edited 1 time in total.
Quote
Like
Share

Joined: December 22nd, 2010, 9:20 am

May 9th, 2012, 8:26 pm #9

Hello guys,
Back to my project and the hangar which has been asking for more and more detailing..

To start with,I didn't like the exterior look of it

[/IMG]

so back to the start...

[/IMG]

[/IMG]

[/IMG]

some patches with Humbrol 96

[/IMG]

I scratched a tiny part of the roof

[/IMG]

I dry fitted it,( the floor has been primed with grey as you can see),

[/IMG]

I like it more now,..

[/IMG]

time to put each piece in its place

[/IMG]

I drilled more than 150 holes to rivet the corrugated siding

[/IMG]

[/IMG]

I removed the excess

[/IMG]

the windows..

[/IMG]

[/IMG]

[/IMG]

just look at that!!! I should definitely find a way to straighten it!!..

[/IMG]

[/IMG]

sometimes it's ok to have a break and stretch your legs!!!!

[/IMG]

this is part of my modeling lamp! lol!!!

[/IMG]

the door wheels should run on rails, shouldn't it??

[/IMG]

Then comes the floor weathering

[/IMG]

but a black wash revealed nasty scratches on the wooden case..

[/IMG]

so.....guess what!!!!!

[/IMG]

sniffing the dust of a life time!!!

[/IMG]

Here we go again..

[/IMG]

[/IMG]

In the mean time a very good friend of mine painted excellently the nine mechanics who will give you a better look of the hangar size..

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

[/IMG]

in case you have forgotten there is a bird unfinished!! lol!

[/IMG]

the floor ready at last..Some oil patches will b added later on..

[/IMG]

Finished?? Not quite!! A good friend told me that the cardboard screen looked like a long luxurious piece of...furniture and on the other hand it coulnt have been standing on its own!!
I sprayed the balsa with lighter tones and had a difficult time adding the metal supports..

[/IMG]

[/IMG]

I'll wash the area and then I'm going to add some wiring throughout as well as some fuse boxes

in their places...

Hope you like my work so far..Any kind of comment welcome..

Cheers,

Panagiotis.


A serious case of AMS if ever I saw it but man don't go to the doctor for a cure as that is some of the most extraordinary modelling I have ever seen, I LOVE IT!!!!! You could give a lesser modeller a complex!
Just blown away by it all.
Regards
Steve.
Quote
Like
Share