1/48 Hasegawa F-4G part needed...

Joined: February 27th, 2005, 3:40 pm

December 16th, 2014, 8:05 pm #1

I need the part P6 from the 1/48 Hasegawa F-4G kit.

If anyone has this kit and can help me out, please let me know.

Thank you for your help.

Scott
CNJC-IPMS
Quote
Like
Share

Joined: August 1st, 2004, 8:17 pm

If I knew what that was, I could see if I had it.....n/m

December 17th, 2014, 6:06 am #2

.
Quote
Like
Share

Joined: December 24th, 2002, 10:24 pm

It appears to be an upper blade antenna

December 17th, 2014, 1:15 pm #3

Quote
Like
Share

Joined: February 27th, 2005, 3:40 pm

UHF antenna..

December 17th, 2014, 3:46 pm #4

Yes, it is the UHF antenna. The antenna fits offset to the right side of the center of the fuselage spine. The base of the part is shaped so that it fits this way specifically. Scratch-building this part/base is NOT an option for me.

If you have this kit/part and can help me out, I would be most appreciative. Please let me know.

Scott
CNJC-IPMS
Quote
Like
Share

Joined: August 1st, 2004, 8:17 pm

Looked...don't have one....sorry - nm

December 17th, 2014, 6:52 pm #5

I need the part P6 from the 1/48 Hasegawa F-4G kit.

If anyone has this kit and can help me out, please let me know.

Thank you for your help.

Scott
CNJC-IPMS
.
Quote
Like
Share

Joined: October 22nd, 2009, 11:44 pm

Hi, Scott -- You can make one out of brass sheet stcok quite easily and --

December 19th, 2014, 2:21 am #6

I need the part P6 from the 1/48 Hasegawa F-4G kit.

If anyone has this kit and can help me out, please let me know.

Thank you for your help.

Scott
CNJC-IPMS
drll holes in model to seat it into the body. Then super-glue it in place , kick it and file and sand the area smooth. Makes for a very solid antenna that is much more difficult to break.

I do this on all of my models anymore ... anyone who mis-handles the model will likely need a band-aid !!! Good luck, George
Quote
Like
Share