C6 4x4 filter extension tube dimensions

C6 4x4 filter extension tube dimensions

Joined: May 9th, 2018, 6:48 pm

May 9th, 2018, 6:54 pm #1

I'm rebuilding a C6 for a 4x4 bronco and the transmission is missing the extension tube that fits into the grommet on the bottom of the filter.
Does anyone have the dimensions of this tube so I can make one?
Quote
Like
Share

Joined: March 23rd, 2004, 11:14 am

May 10th, 2018, 8:03 am #2

33.5mm O.D , total length of main tube 33mm, 2 small legs/tangs on the bottom 8.5mm , overall length including tangs 41.5mm. 
There is a ridge that goes up against the grommet, it is 12mm down from the top to the edge of the ridge
Quote
Like
Share

Joined: May 9th, 2018, 6:48 pm

May 10th, 2018, 5:58 pm #3

thank you
Quote
Like
Share

Joined: November 18th, 2004, 4:20 am

May 11th, 2018, 6:07 am #4

Or take the filter and gromet to a store and get a piece of PVC. Cut some notches in the bottom. 
Quote
Like
Share

Joined: March 23rd, 2004, 11:14 am

May 11th, 2018, 7:54 am #5

Last one I did I machined an aluminum tube  :)  It was bit deeper than factory for a B&M pan 
DSCN2765.jpg
Quote
Like
Share

Joined: November 18th, 2004, 4:20 am

May 11th, 2018, 12:18 pm #6

Looks good. 
Quote
Like
Share