For sale: Microtech MTX-8 ecu, handset and loom

Joined: July 24th, 2004, 3:31 am

September 11th, 2015, 12:58 pm #1

Hi,

Up for sale is my Microtech MTX-8 ecu, handset, cable and wiring loom to suit FJ20ET. It is second hand but in good working condition. The loom has been fitted to my FJ20ET but everything is there to wire it up in another FJ20ET application. I purchased this ecu back in about 2004 and it has never let me down.

Current tune on it is for E85, 38psi boost and was making around 350rwkw in my Datsun 1600 drag car. Ran a PB of 10.83 @ 131mph using this ECU and the tune that's currently on it in December 2014. However can be tuned to whatever FJ20ET application you require.

Only selling due to upgrade so I can run more boost, timing and actually log whats going on inside the engine.

Price $450 ono for everything. Located in Sydney, N.S.W but will post interstate.

Regards,
Blayne
0416 538 440
Quote
Like
Share

Anonymous
Anonymous

September 13th, 2015, 4:08 am #2

What r u upgrade to mate look at doing the some just don't know what ECU to upgrade to
Quote
Share

Joined: July 24th, 2004, 3:31 am

September 14th, 2015, 12:23 am #3

Hi,

Up for sale is my Microtech MTX-8 ecu, handset, cable and wiring loom to suit FJ20ET. It is second hand but in good working condition. The loom has been fitted to my FJ20ET but everything is there to wire it up in another FJ20ET application. I purchased this ecu back in about 2004 and it has never let me down.

Current tune on it is for E85, 38psi boost and was making around 350rwkw in my Datsun 1600 drag car. Ran a PB of 10.83 @ 131mph using this ECU and the tune that's currently on it in December 2014. However can be tuned to whatever FJ20ET application you require.

Only selling due to upgrade so I can run more boost, timing and actually log whats going on inside the engine.

Price $450 ono for everything. Located in Sydney, N.S.W but will post interstate.

Regards,
Blayne
0416 538 440
Upgrading to Haltech ps1000 and M&W CDI ignition system
Quote
Like
Share

Anonymous
Anonymous

September 25th, 2015, 4:37 am #4

Hi,

Up for sale is my Microtech MTX-8 ecu, handset, cable and wiring loom to suit FJ20ET. It is second hand but in good working condition. The loom has been fitted to my FJ20ET but everything is there to wire it up in another FJ20ET application. I purchased this ecu back in about 2004 and it has never let me down.

Current tune on it is for E85, 38psi boost and was making around 350rwkw in my Datsun 1600 drag car. Ran a PB of 10.83 @ 131mph using this ECU and the tune that's currently on it in December 2014. However can be tuned to whatever FJ20ET application you require.

Only selling due to upgrade so I can run more boost, timing and actually log whats going on inside the engine.

Price $450 ono for everything. Located in Sydney, N.S.W but will post interstate.

Regards,
Blayne
0416 538 440
Hey mate just curious what kind of box and diff setup you run in you 1600 drag car??

Auto or Manual? What box?

IRS rear end? if so what ratio R200?Locked or LSD?

Cheers

Quote
Share

Joined: July 24th, 2004, 3:31 am

October 30th, 2015, 12:11 am #5

Hi,

Up for sale is my Microtech MTX-8 ecu, handset, cable and wiring loom to suit FJ20ET. It is second hand but in good working condition. The loom has been fitted to my FJ20ET but everything is there to wire it up in another FJ20ET application. I purchased this ecu back in about 2004 and it has never let me down.

Current tune on it is for E85, 38psi boost and was making around 350rwkw in my Datsun 1600 drag car. Ran a PB of 10.83 @ 131mph using this ECU and the tune that's currently on it in December 2014. However can be tuned to whatever FJ20ET application you require.

Only selling due to upgrade so I can run more boost, timing and actually log whats going on inside the engine.

Price $450 ono for everything. Located in Sydney, N.S.W but will post interstate.

Regards,
Blayne
0416 538 440
I run a 3 speed GMH trimatic, full manual valve body, transbrake, 4000rpm converter. 3" Holden v8 tailshaft.Rear end is still IRS with 3.9:1 R200 LSD with rebuilt and shimmed clutch pack. CV drive shafts 4340 chromoly shafts
Quote
Like
Share

Joined: September 22nd, 2015, 10:47 pm

December 2nd, 2015, 9:10 am #6

Hi,

Up for sale is my Microtech MTX-8 ecu, handset, cable and wiring loom to suit FJ20ET. It is second hand but in good working condition. The loom has been fitted to my FJ20ET but everything is there to wire it up in another FJ20ET application. I purchased this ecu back in about 2004 and it has never let me down.

Current tune on it is for E85, 38psi boost and was making around 350rwkw in my Datsun 1600 drag car. Ran a PB of 10.83 @ 131mph using this ECU and the tune that's currently on it in December 2014. However can be tuned to whatever FJ20ET application you require.

Only selling due to upgrade so I can run more boost, timing and actually log whats going on inside the engine.

Price $450 ono for everything. Located in Sydney, N.S.W but will post interstate.

Regards,
Blayne
0416 538 440
Hi mate would you mind putting it in a box and send to New Zealand? Need to get my R30 running properly and probably much easier to do this than persevere with the stock stuff.

Thanks
Quote
Like
Share

Anonymous
Anonymous

December 8th, 2015, 9:47 am #7

Hi,

Up for sale is my Microtech MTX-8 ecu, handset, cable and wiring loom to suit FJ20ET. It is second hand but in good working condition. The loom has been fitted to my FJ20ET but everything is there to wire it up in another FJ20ET application. I purchased this ecu back in about 2004 and it has never let me down.

Current tune on it is for E85, 38psi boost and was making around 350rwkw in my Datsun 1600 drag car. Ran a PB of 10.83 @ 131mph using this ECU and the tune that's currently on it in December 2014. However can be tuned to whatever FJ20ET application you require.

Only selling due to upgrade so I can run more boost, timing and actually log whats going on inside the engine.

Price $450 ono for everything. Located in Sydney, N.S.W but will post interstate.

Regards,
Blayne
0416 538 440
Dear MR shandawg
you made my day
thank you

Quote
Share

Joined: September 22nd, 2015, 10:47 pm

January 13th, 2016, 3:40 am #8

Hi,

Up for sale is my Microtech MTX-8 ecu, handset, cable and wiring loom to suit FJ20ET. It is second hand but in good working condition. The loom has been fitted to my FJ20ET but everything is there to wire it up in another FJ20ET application. I purchased this ecu back in about 2004 and it has never let me down.

Current tune on it is for E85, 38psi boost and was making around 350rwkw in my Datsun 1600 drag car. Ran a PB of 10.83 @ 131mph using this ECU and the tune that's currently on it in December 2014. However can be tuned to whatever FJ20ET application you require.

Only selling due to upgrade so I can run more boost, timing and actually log whats going on inside the engine.

Price $450 ono for everything. Located in Sydney, N.S.W but will post interstate.

Regards,
Blayne
0416 538 440
Glad I could be of service MR Anonymous

Blayne did you end up selling this?
Quote
Like
Share