Joined: July 15th, 2005, 8:09 pm

June 5th, 2006, 8:06 pm #1

Back to the MASTER INDEX Files

Back to the Chris Craft Commander Forum

(Updated February 22, 2008)

NEW >>> 307-Q, 327-Q, and 350-Q Owner Operations Manual
http://www.network54.com/Forum/424840/m ... 475271160/

NEW >>> Chris Craft Power ( Just about every V8 motor CC ever built )
http://www.network54.com/Forum/424840/m ... 172181250/

NEW >>> RACOR fuel/water separator and filter
http://www.network54.com/Forum/424840/m ... 1185213909

NEW >>> Ballast resistor and 350Q running problems
http://www.network54.com/Forum/424840/m ... 1185804396

NEW >>> Carb problem troubleshooting issues
http://www.network54.com/Forum/424840/m ... 1186411196

NEW >>> Starting problems ( Generic to all motors )
http://www.network54.com/Forum/424840/m ... 1187100002

NEW >>> Splitfire plug wires
http://www.network54.com/Forum/424840/m ... 1188489076

NEW >>> Edelbrock carb swap
http://www.network54.com/Forum/424840/m ... 1190492092

NEW >>> Edelbrock marine carb
http://www.network54.com/Forum/424840/m ... 1202489422

NEW >>> Tilt shims for carbs
http://www.network54.com/Forum/424840/m ... 1190387283

NEW >>> Fuel lines and hoses
http://www.network54.com/Forum/424840/m ... 1190815261

NEW >>> 327F Pertronix Ignition Installation
http://www.network54.com/Forum/424840/m ... 1191080453

NEW >>> Trusted Commander Parts Suppliers
http://www.network54.com/Forum/424840/m ... 1191628881

NEW >>> 350Q distributor issues
http://www.network54.com/Forum/424840/m ... 1183358543

NEW >>> Rotation ( an explanation of Standard and Reverse )
http://www.network54.com/Forum/424840/m ... 1157641525

NEW >>> Winterization plumbing circuit
http://www.network54.com/Forum/424840/m ... 1194883544

NEW >>> Small Block Q series timing ( Conflicting data )
http://www.network54.com/Forum/424840/m ... 1197417897

NEW >>> Engine hoist
http://www.network54.com/Forum/424840/m ... 1197132572

350Q Rebuilding Thread (A great how to thread with lots of photos, from Mark Weller)
http://www.network54.com/Forum/424840/m ... 145359/350 (Camshaft discussion)
http://www.network54.com/Forum/424840/m ... 1160009596 (Discovery of bad camshaft)
http://www.network54.com/Forum/424840/m ... 1160704886 (Back from the machine shop)
http://www.network54.com/Forum/424840/m ... 1163817431 (Reassembly)

Pressure Regulators Can Cause Engine Overheating
http://www.network54.com/Forum/424840/m ... 1164411296

327F Resurrection after 6 years (Video smoking down the neighborhood and specs)
http://www.network54.com/Forum/424840/m ... 1164395538

307QLV and 350Q Interchangeable Parts (Interesting reference thread)
http://www.network54.com/Forum/424840/m ... 1164153141

327Q Details and Specifications
http://www.network54.com/Forum/424840/m ... 1163045639

Sherwood 327F and 427 Sea Water Pump (Photo Documentation)
(This is a 427 thread, but both engines can use the same pump)
http://www.network54.com/Forum/424840/m ... 1156595176

Sherwood Dual Impeller Sea Water Pump (Old style 4-ports)
http://www.network54.com/Forum/424840/m ... 156386823/

350Q fuel problems (a diagnostic thread)
http://www.network54.com/Forum/424840/m ... 1154465436

350Q Rebuild Issues (a diagnostic and technical thread)
http://www.network54.com/Forum/424840/m ... 1149706439

327 and 350 F motor documentation (Insight into the model deviations)

Fuel delivery, anti-siphon issues (diagnostic thread)

327F Cooling Diagram
http://www.network54.com/Forum/424840/m ... 1140195682

Early 283 and 327 Photo Documentation (Lots of Photos)
http://www.network54.com/Forum/424840/m ... 1126289673

Marine engine troubleshooting guide (Scans)
http://www.network54.com/Forum/424840/m ... 1123099503

350Q engine diagnostics, Mark Wellers diagnostic thread.
http://www.network54.com/Forum/424840/m ... 1143830136

350Q Timing
http://www.network54.com/Forum/424840/m ... 1147532943

Small Block Chevy Cylinder Head Rebuilding Project
http://www.network54.com/Forum/424840/m ... 1139761806

283 and 327 Specifications and Operations statement (scans)
http://www.network54.com/Forum/424840/m ... 123103583/

Small Block Chevrolet Heat Exchanger Modification to Volvo Penta (Photo)
http://www.network54.com/Forum/424840/m ... 1121461323

Carter AFB Carb Specs (Photos)
http://www.network54.com/Forum/424840/m ... 1125684478
http://www.network54.com/Forum/424840/m ... 1139721799

More info on Carter Carbs (work sheet scan)
http://www.network54.com/Forum/424840/m ... 1144702953

Generic Hard Starting issues
http://www.network54.com/Forum/424840/m ... 1138021506

Cold Start Tips
http://www.network54.com/Forum/424840/m ... 1138320614

Spark Plug Reference Material (Photos)
http://www.network54.com/Forum/424840/m ... 1124816710

Sherwood Pump Photos and Specs (Photos)
http://www.network54.com/Forum/424840/m ... 1134077503

Pertronix Ignition System (Primarily for the 427 but good info for the SBC too) Photos
http://www.network54.com/Forum/424840/m ... 1131313926

MANY THANKS to everyone who has contributed to the information in these files. This forum will always be a work in progress. Its a way to file away all of my Commander information for personal use, and its also a way to share it with anyone else who may be interested, or who may need the info (for their personal and non-commercial purposes), or may want to post, ask questions, etc. Because much of the information on the forum is not checked for accuracy, represents opinions in some cases from unknown sources, and may represent a safety or personal/financial liability if acted upon, the information in this forum and Master Index is offered with the very best of intentions, but it MUST be validated by the user before utilization in any way. If anyone sees a link in this index that does not work, of finds any inaccuracies, please post a note and Ill try to fix it!

Regards, all the best,

©2005, ©2006, ©2007, ©2008, Chris-Craft Commander Forum, Inc., ©2005, ©2006, ©2007, ©2008, chriscraftcommander.com. Information on this site may be copied for individual personal use, but any other reproduction or use requires written approval.

Back to the MASTER INDEX Files

Back to the Chris Craft Commander Forum

Last edited by FEfinaticP on February 12th, 2017, 1:16 am, edited 1 time in total.