A Kitchen area Laundry Cabinet Full of Surprises

Joined: September 12th, 2018, 2:47 pm

September 14th, 2018, 2:29 pm #1

Millette liked that the U-shaped kitchen allowed him ample storage with out the need for higher cabinets.Oversized Canvas Art After removing the dropped ceiling to reveal the wood beams and 

open up the little cooking area,Minimalist Art On Canvas he didn’t want something stacked vertically. So this individual positioned the washer plus dryer side by 

aspect at the edge of the kitchen — near those plumbing ranges — after which encased them so they will be hidden when not in use.
 Industrial Kitchen by Large Panda Design
Big Panda Design
He cut and glued two Ikea Numerär countertops side by aspect over a plywood body to create a 48-inch-deep counter space that would cover the appliances plus provide a surface regarding folding clothes. He remaining some overhang to 

permit for a spot to sit down. “It’s so large that on one side, it is my working counter regarding the kitchen, and on the other is my kitchen area table, ” he states.

The total budget regarding the wood, he states, was $1, 100; the project involved more compared to 20 hours of sanding,Extra Large Contemporary Art  cutting and 

assembling by using a carpenter friend.
 Commercial Kitchen by Big Panda Design
Big Panda Style
There is about six inches of space involving the appliances and the back again from the bar.Large Abstract Painting 

 The domestic plumbing, electrical cords and dryer exhaust run through an opening at the back of the pub and link to the wall in the four inches of space beneath the kitchen cabinets.

The 2 big doors that conceal the appliances are produced from a refrigerator -panel from The Home Depot that Millette cut by 50 % and turned sideways. “They fit perfectly, ” he admits that. Problems solved.

Not getting a washer and dryer in his 500-square-foot Montreal loft area was a huge problem with regard to designer Sébastien Millette. Therefore when he set out there to redesign the location, he was determined in order to find room for 

them. He’d hoped to get a dining area between the U-shaped kitchen and living area, but there just was not enough space for a table. That’s when this dawned on him. “Since the plumbing of the kitchen area wasn’t too far aside, I 

figured having the washer and dryer in the kitchen made sense, ” Millette says. In order to solve the issue of the eating table, he came upward with an idea to generate one over the devices.
Quote
Like
Share