neondog
Addicted
neondog
Addicted
Joined: January 8th, 2009, 7:30 pm

November 12th, 2017, 2:33 am #31

neondog wrote: This is truly amazing! I have been shooting, shopping and eating blowguns for fifteen years and I have never heard one rumor of such a bvlowgun. Just tried Google but couldn't come up with much. Do we need security clearance to learn more? EAGER
Alas, after about five attempts I have a successful post. All(most all) silver linings have a cloud. 

I was thinking about looking for a shop near me that did small run chrome jobs to get a quote on a four foot piece of half inch I.D. steel pipe but the first website I visited had a photo gallery chock full of amazing looking polished aluminum. Now I'm leaning more toward attempting to shine up the inside of a couple pieces of my 3/4" Maclenberg-Dunkin aluminum bright.

I don't expect a noticeable increase in muzzle velocity but perhaps it will be easier to wax (paraffin.)
United States Blowgun Associationusblowgun.com
Quote
Like
Share

devilgun
rookie
devilgun
rookie
Joined: November 9th, 2017, 12:56 pm

November 12th, 2017, 9:08 am #32

We should have some control with security. Into the wrong hands could lead to legal issues. With the use of glass there are no coatings. Windex is all that is needed to clean. Dart material options improve greatly.. My interest in blowguns came from Peace Corps. Was assigned to upper Amazon basin with Indian tribes who use dart guns extensively. 
Quote
Like
Share

neondog
Addicted
neondog
Addicted
Joined: January 8th, 2009, 7:30 pm

November 21st, 2017, 2:55 am #33

devilgun wrote: ....  Was assigned to upper Amazon basin with Indian tribes who use dart guns extensively. 
Any with extremely short hair and red face paint? I love the look of the blowguns of the Nukak Maku!
United States Blowgun Associationusblowgun.com
Quote
Like
Share

devilgun
rookie
devilgun
rookie
Joined: November 9th, 2017, 12:56 pm

March 6th, 2018, 7:14 pm #34

No
Quote
Like
Share

devilgun
rookie
devilgun
rookie
Joined: November 9th, 2017, 12:56 pm

March 6th, 2018, 7:22 pm #35

All persons who buy my blowguns must pick them up in person so we can verify identity in a state that allows their use. 
Quote
Like
Share

devilgun
rookie
devilgun
rookie
Joined: November 9th, 2017, 12:56 pm

March 6th, 2018, 7:25 pm #36

We do need a website. We enjoy this site as a forum for improvement.
Quote
Like
Share

targetzonesports
Addicted
Joined: June 30th, 2009, 1:28 pm

March 11th, 2018, 7:06 am #37

Hello all, As far as Tufram Teflon Blowguns, We do have a large stock of 48" and in also 24" Tufram coated and professionally treated blowguns in our aersonal stock for those interested.

We have only .40 calibers left but rather a large stock. Before anybody ask's we ran out of .50 calibers years ago, and in also these are the last tufram blowguns on the market and will not be producing any more of this series due to: The expensive production cost of this treatment.

With that said, we do have plenty of .40 cal tufram teflon treated blowguns in stock for collectors or those of interest alike.

http://www.blowgun.com/shop/category.aspx?catid=76

God Bless all...

Best, Bruce
TARGET ZONE SPORTS, Inc.
Quote
Like
Share

devilgun
rookie
devilgun
rookie
Joined: November 9th, 2017, 12:56 pm

March 11th, 2018, 7:56 am #38

neondog wrote:
neondog wrote: This is truly amazing! I have been shooting, shopping and eating blowguns for fifteen years and I have never heard one rumor of such a bvlowgun. Just tried Google but couldn't come up with much. Do we need security clearance to learn more? EAGER
Alas, after about five attempts I have a successful post. All(most all) silver linings have a cloud. 

I was thinking about looking for a shop near me that did small run chrome jobs to get a quote on a four foot piece of half inch I.D. steel pipe but the first website I visited had a photo gallery chock full of amazing looking polished aluminum. Now I'm leaning more toward attempting to shine up the inside of a couple pieces of my 3/4" Maclenberg-Dunkin aluminum bright.

I don't expect a noticeable increase in muzzle velocity but perhaps it will be easier to wax (paraffin.)
Quote
Like
Share

devilgun
rookie
devilgun
rookie
Joined: November 9th, 2017, 12:56 pm

March 11th, 2018, 7:58 am #39

devilgun wrote:
neondog wrote:
neondog wrote: This is truly amazing! I have been shooting, shopping and eating blowguns for fifteen years and I have never heard one rumor of such a bvlowgun. Just tried Google but couldn't come up with much. Do we need security clearance to learn more? EAGER
Alas, after about five attempts I have a successful post. All(most all) silver linings have a cloud. 

I was thinking about looking for a shop near me that did small run chrome jobs to get a quote on a four foot piece of half inch I.D. steel pipe but the first website I visited had a photo gallery chock full of amazing looking polished aluminum. Now I'm leaning more toward attempting to shine up the inside of a couple pieces of my 3/4" Maclenberg-Dunkin aluminum bright.

I don't expect a noticeable increase in muzzle velocity but perhaps it will be easier to wax (paraffin.)
Quote
Like
Share

neondog
Addicted
neondog
Addicted
Joined: January 8th, 2009, 7:30 pm

March 13th, 2018, 3:21 am #40

devilgun:
devilgun wrote:

I don't expect a noticeable increase in muzzle velocity but perhaps it will be easier to wax (paraffin.)


Hang in there Devilgun. the forum is giving me a hard time posting now but surely there will be a smooth stretch of road ahead somewhere. I was thinking chromed steel so I could carry a non-rusting hollow club. Thick walled aluminum would bend easier but I doubt I'll ever have to fend off a bear anyway.
United States Blowgun Associationusblowgun.com
Quote
Like
Share