Will it fit?

Will it fit?

Joined: August 17th, 2011, 9:22 pm

August 31st, 2011, 10:48 pm #1

Does anyone know if the Walthar Lothar .177 barrel that Crosman offers will fit the 1377? If so,how much does Crosman ask and does it have to be crowned?
Reply
Like
Share

Joined: April 28th, 2010, 12:23 am

September 1st, 2011, 3:11 am #2

to the best of my knowlegde, and need to be machined for transfer
Reply
Like
Share

Joined: September 6th, 2006, 3:27 am

September 1st, 2011, 4:13 am #3

no, they are NOT thicker, they are exactly the same.
It will fit on a 1377 just fine, it won't quite fit the barrel band right,but close enough.
Reply
Like
Share

Joined: April 28th, 2010, 12:23 am

September 1st, 2011, 4:22 am #4

were thicker, and the tp needs to be done, like i said ive never tried so im goin off common info from the prod and mrod, either way machining is needeed.but id say go for it, someone will turn it down for u im sure
Reply
Like
Share

Joined: September 6th, 2006, 3:27 am

September 1st, 2011, 4:26 am #5

The question, I think, was regarding the 10.1" Lothar / Walther barrel offered through Crosman's Custom Shop for the 2300 and 2400 models, it is also the barrel that comes standard on the model 2300S.
This barrel is just like every other 22xx and 13xx barrel, it is 7/16" O.D.

There is not argument about this, it is just fact.

Also, the TP is in the exact same location...the L/W barrel will fit ANY 22xx and 13xx with NO MODS needed at all.
Reply
Like
Share

Joined: September 6th, 2006, 3:27 am

September 1st, 2011, 4:28 am #6

You can only get one if you order it on a custom shop gun or buy a 2300S.........as far as I know .
If anyone else knows different, please let me know.
Reply
Like
Share

Joined: April 28th, 2010, 12:23 am

September 1st, 2011, 4:39 am #7

The question, I think, was regarding the 10.1" Lothar / Walther barrel offered through Crosman's Custom Shop for the 2300 and 2400 models, it is also the barrel that comes standard on the model 2300S.
This barrel is just like every other 22xx and 13xx barrel, it is 7/16" O.D.

There is not argument about this, it is just fact.

Also, the TP is in the exact same location...the L/W barrel will fit ANY 22xx and 13xx with NO MODS needed at all.
i was thinkin lw blanks which need to be machined , that might be perfect, apologies,.
Reply
Like
Share

Joined: August 17th, 2011, 9:22 pm

September 1st, 2011, 4:44 am #8

Does anyone know if the Walthar Lothar .177 barrel that Crosman offers will fit the 1377? If so,how much does Crosman ask and does it have to be crowned?
I know i've seen it on a parts list and it does have a part number.Can you order this seperately and for how much is the big question? Thank You
Reply
Like
Share

Joined: September 6th, 2006, 3:27 am

September 1st, 2011, 7:25 pm #9

had to check on a parts order anyway, and I asked about the barrel in question.

It is confirmed, you can not order this barrel. Only can be had on a custom shop order.

Usually, when I want this barrel ( and other custom shop parts ) , I will order the custom shop gun with the parts I want, even though I will be making a .22 or some other gun using the custom shop gun as a base to build on.
It is a good way to go, you get the basic pistol with a steel breech already and I usually order it with the L/W barrel, then I have that barrel available to install in a customer's gun if that is what is ordered.
Custom shop is also the only way to get the camo or carbon finish shoulder stock, and I usually order with one of those options.
Reply
Like
Share

Joined: August 17th, 2011, 9:22 pm

September 2nd, 2011, 12:15 am #10

If I ordered a custom gun with the W/L barrel,will they ship an extra W/L barrel on the side if I ordered it with the custom gun?
Reply
Like
Share