Rocker Safety Email from Mac1

Rocker Safety Email from Mac1

Joined: November 14th, 2002, 6:27 pm

August 31st, 2011, 6:28 pm #1

The following relates to the fitting of a Hard #004 90 Durometer Urethane oring to the bolt of a Sheridan 5MM Rocker Safety Model.

> Are there any hints on how to get the O ring on the bolt without damaging it? TS

I use tweezers. Slip oring over tip and spread with a small driver to stretch oring. A Hemroid specialist showed me this trick as it is the way they use 90 durometer Urethane 003 orings to cut off blood flow to the roids. I know, too much info! Tim

> Any tool to remove the 1/8" bolt that goes into the bolt so the bolt can be pulled out? TS

The tool is an 1/8" allen driven set screw with a wing nut and jam nut on the threaded end and the head turned down so it clears the hole the Lug is in. Tim

>
> Silver Streak Rocker Safety.
>
> Is there any significance to the serial number? 669 1K TS

1966 K=Nov Year is transposed. Month is in letter form Tim



"NO GUNS WOULD BE A RIOT"

Later

Tim

Mac1 Airgun


Quote
Like
Share