Hey Phil, got the barrrel , pretty wild looking ! As for the makarov, i was wondering

Hey Phil, got the barrrel , pretty wild looking ! As for the makarov, i was wondering

Joined: April 28th, 2010, 12:23 am

March 5th, 2012, 2:15 am #1

Reply
Like
Share

Joined: April 1st, 2009, 3:18 am

March 5th, 2012, 1:10 pm #2

The paradox barrel works great at slower velocities. A lapping on the transition area may improve higer velocity accuracy.

The Makarov mod can be done using a Crosman barrel AND the factory barrel. Drill out the bore of the Crosman barrel so the straw barrel of the Mak slips in. This will create the longer 7/16 barrel for fitting devices.

"The majority of things in our lives are created by folks no smarter than the rest. Afterall, the world is comprised, and operated by C average people intellctually, academically, and morally. These people are often the great pioneers that set the precedent for what excellence should be."
Reply
Like
Share

Joined: April 28th, 2010, 12:23 am

March 5th, 2012, 2:18 pm #3

Reply
Like
Share

Joined: April 1st, 2009, 3:18 am

March 5th, 2012, 4:03 pm #4

The brass tube is slipped over two sections of 7/16 barrel. One barrel is smooth bore and the other is rifled. The rifled section is about 2" long. The compression rings secure the brass tube to the barrels making a tight fit and keep the barrels centered (concentric).

The Mak slide is removed by pulling the slide back (hold it), lower the trigger guard, lift up on the rear of the slide then slide forward all the while holding the trigger guard down.

"The majority of things in our lives are created by folks no smarter than the rest. Afterall, the world is comprised, and operated by C average people intellctually, academically, and morally. These people are often the great pioneers that set the precedent for what excellence should be."
Reply
Like
Share

Joined: April 28th, 2010, 12:23 am

March 5th, 2012, 6:12 pm #5

Reply
Like
Share