After two months, Mrod HDDs are back in stock at AoA! Abject apologies to...

After two months, Mrod HDDs are back in stock at AoA! Abject apologies to...

Joined: November 28th, 2002, 6:26 pm

December 2nd, 2011, 2:42 pm #1


...those who have been waiting so patiently for so long (two months!!), but the delays are finally over and parts are in hand at last.

http://www.airgunsofarizona.com/CustomParts.htm


Steve
Reply
Like
Share

Joined: April 28th, 2010, 12:23 am

December 2nd, 2011, 3:11 pm #2

might use this in the disco double so as to have as many 25cal shots as possible , I will market it as the new fx elite made in america finally! lol
Reply
Like
Share

Joined: November 28th, 2002, 6:26 pm

December 2nd, 2011, 3:27 pm #3



AoA has them in stock, too.

Also, if you plan to use the Disco/22xx HDD in a high-power tune, there's a simple modification to the end of the bolt that prevents the HDD from being crushed if an over-sprung hammer drives the cocking pin into the bolt.

With stock springs, there's no issue.



http://www.network54.com/Forum/79537/me ... +breakage-



Steve
Reply
Like
Share

Joined: April 28th, 2010, 12:23 am

December 2nd, 2011, 4:06 pm #4

impact , makes sense, this will be a stock spring maxed, 26 fpe in 22, about 35 in 25
Reply
Like
Share

Joined: November 28th, 2002, 6:26 pm

December 2nd, 2011, 4:41 pm #5

...direct contact with the pin, if contact is dictated by the tune.

Which itself isn't a great idea, but at least it avoids breaking the HDD.

Steve
Last edited by pneuguy on December 2nd, 2011, 4:42 pm, edited 1 time in total.
Reply
Like
Share

Joined: April 28th, 2010, 12:23 am

December 2nd, 2011, 4:51 pm #6

as long as it works.. And im not trying to build a 100fpe hammer, just a high shot count 25 cal with low operating pressures.Ideally 30 shots at 35fpe, right now it would do 14 with no extension or hdd..
Reply
Like
Share