Citizen 300m professional pics and review

Citizen 300m professional pics and review

Joined: January 17th, 2005, 3:34 pm

March 24th, 2005, 4:57 pm #1

Since there was some discussion yesterday on the originality of Guido's 800m/300m Citizen diver yesterday here's a quick review of my 300m to complement my earlier posts and pictures on the 1300m and 800m.

As far as I know Citizen made their first "Professional" diver, the 1300m, in the mid eighties as a tour the force to show they could make a quartz watch with the highest depth rating in those days. These were made only a short time and are now almost impossible to find.

In the early nineties Citizen came out with the 800m and 300m versions. You will come across a handful of each on the Bay each year, but most are listed outside the USA and they are often in ratty condition. Since parts are very hard to come by it is usually not worth it to buy a non-working or incomplete watch, unless you intend to use it as a parts watch.

Both the 300m has the 5503 quartz movement with a 5 year battery life. The case is made of TIN coated titanium. The same coating can also be found on high end line guides for fishing rods and is extremely resistant against abrasion. This finish can be dented when knocked hard, but remains scratch free, giving the watch a very nice aged look over time. It is still used on the original version of the Citizen Aquamount.



The watch has the standard Citizen diver layout, with the crown positioned at 8 o'clock. On pictures the watch appears mid sized, but in fact it has a 22mm strap, and the watch is 41.5mm wide and 13mm thick. Due to the short lugs, relatively flat bottom and light weight it is very comfortable to wear and suited for smaller wrists.

The 300m DOES have the helmet case back like the 800m and later professional divers.



The bezel on the 300m is a normal, fixed design contrary to the push-and-turn locking bezel of the 800m. It clicks in 1 minute increments, and is one of the smoothest I have found on a Citizen dive watch. Thanks to the tall design and wide edges it is very easy to grab and turn even with wet hands. I wish they would bring this back on some of their newer designs.



One thing I like on this watch is the crystal with bevelled edge, which gives the watch some extra class. Mine was very scratched when the watch arrived, but somehow Citizen must have found an original in the back of a dusty drawer when it was sent in for service, and the crystal is now as good as new again.



I have now had all of the rare Citizen Professionals and they are all awesome examples of what Citizen is capable of. I think they are underrated compared to their Seiko counterparts. My only gripe: they all have a gold finished bezels, hands and hour markers. I prefer the cleaner, brighter look of the newer 1000m and 300m models, but that's just personal taste.
Quote
Like
Share

Joined: September 3rd, 2004, 9:30 pm

March 24th, 2005, 5:12 pm #2

One: your measurements are probably more accurate.
Two: I have one more gripe, I wish the crystal was sapphire (mine has some very small scratches; the bezel and case look almost NOS though).
Three: could you please post your pictures of the other Citizen divers (800m, 1300m, 1500m) again or send them to me by email? Most pictures in older posts (including divers from the deep) don't show anymore. Thanks in advance!

Guido S
Last edited by lawmanguido1968 on March 24th, 2005, 5:18 pm, edited 1 time in total.
Quote
Like
Share

Joined: January 17th, 2005, 3:34 pm

March 24th, 2005, 5:25 pm #3

Hi Guido,

I did not save the pics, unfortunately, but my 1300m and 800m pics are still available in the Watch Foto Database.

1300m (first 6 pics):
http://www.ittc.ku.edu/~jgauch/watch/vi ... 1300m.html

800m (all):
http://www.ittc.ku.edu/~jgauch/watch/vi ... -800m.html
Quote
Like
Share

Joined: August 4th, 2003, 12:42 am

March 24th, 2005, 5:32 pm #4

Since there was some discussion yesterday on the originality of Guido's 800m/300m Citizen diver yesterday here's a quick review of my 300m to complement my earlier posts and pictures on the 1300m and 800m.

As far as I know Citizen made their first "Professional" diver, the 1300m, in the mid eighties as a tour the force to show they could make a quartz watch with the highest depth rating in those days. These were made only a short time and are now almost impossible to find.

In the early nineties Citizen came out with the 800m and 300m versions. You will come across a handful of each on the Bay each year, but most are listed outside the USA and they are often in ratty condition. Since parts are very hard to come by it is usually not worth it to buy a non-working or incomplete watch, unless you intend to use it as a parts watch.

Both the 300m has the 5503 quartz movement with a 5 year battery life. The case is made of TIN coated titanium. The same coating can also be found on high end line guides for fishing rods and is extremely resistant against abrasion. This finish can be dented when knocked hard, but remains scratch free, giving the watch a very nice aged look over time. It is still used on the original version of the Citizen Aquamount.



The watch has the standard Citizen diver layout, with the crown positioned at 8 o'clock. On pictures the watch appears mid sized, but in fact it has a 22mm strap, and the watch is 41.5mm wide and 13mm thick. Due to the short lugs, relatively flat bottom and light weight it is very comfortable to wear and suited for smaller wrists.

The 300m DOES have the helmet case back like the 800m and later professional divers.



The bezel on the 300m is a normal, fixed design contrary to the push-and-turn locking bezel of the 800m. It clicks in 1 minute increments, and is one of the smoothest I have found on a Citizen dive watch. Thanks to the tall design and wide edges it is very easy to grab and turn even with wet hands. I wish they would bring this back on some of their newer designs.



One thing I like on this watch is the crystal with bevelled edge, which gives the watch some extra class. Mine was very scratched when the watch arrived, but somehow Citizen must have found an original in the back of a dusty drawer when it was sent in for service, and the crystal is now as good as new again.



I have now had all of the rare Citizen Professionals and they are all awesome examples of what Citizen is capable of. I think they are underrated compared to their Seiko counterparts. My only gripe: they all have a gold finished bezels, hands and hour markers. I prefer the cleaner, brighter look of the newer 1000m and 300m models, but that's just personal taste.
I've never had one of those older Ctz divers in my collection...I've been tempted many times. Those are very interesting watches and you did a great job illustrating why.

Thanks Joost.
Quote
Like
Share

Joined: September 9th, 2002, 7:12 pm

March 24th, 2005, 5:39 pm #5

Since there was some discussion yesterday on the originality of Guido's 800m/300m Citizen diver yesterday here's a quick review of my 300m to complement my earlier posts and pictures on the 1300m and 800m.

As far as I know Citizen made their first "Professional" diver, the 1300m, in the mid eighties as a tour the force to show they could make a quartz watch with the highest depth rating in those days. These were made only a short time and are now almost impossible to find.

In the early nineties Citizen came out with the 800m and 300m versions. You will come across a handful of each on the Bay each year, but most are listed outside the USA and they are often in ratty condition. Since parts are very hard to come by it is usually not worth it to buy a non-working or incomplete watch, unless you intend to use it as a parts watch.

Both the 300m has the 5503 quartz movement with a 5 year battery life. The case is made of TIN coated titanium. The same coating can also be found on high end line guides for fishing rods and is extremely resistant against abrasion. This finish can be dented when knocked hard, but remains scratch free, giving the watch a very nice aged look over time. It is still used on the original version of the Citizen Aquamount.



The watch has the standard Citizen diver layout, with the crown positioned at 8 o'clock. On pictures the watch appears mid sized, but in fact it has a 22mm strap, and the watch is 41.5mm wide and 13mm thick. Due to the short lugs, relatively flat bottom and light weight it is very comfortable to wear and suited for smaller wrists.

The 300m DOES have the helmet case back like the 800m and later professional divers.



The bezel on the 300m is a normal, fixed design contrary to the push-and-turn locking bezel of the 800m. It clicks in 1 minute increments, and is one of the smoothest I have found on a Citizen dive watch. Thanks to the tall design and wide edges it is very easy to grab and turn even with wet hands. I wish they would bring this back on some of their newer designs.



One thing I like on this watch is the crystal with bevelled edge, which gives the watch some extra class. Mine was very scratched when the watch arrived, but somehow Citizen must have found an original in the back of a dusty drawer when it was sent in for service, and the crystal is now as good as new again.



I have now had all of the rare Citizen Professionals and they are all awesome examples of what Citizen is capable of. I think they are underrated compared to their Seiko counterparts. My only gripe: they all have a gold finished bezels, hands and hour markers. I prefer the cleaner, brighter look of the newer 1000m and 300m models, but that's just personal taste.
..
Quote
Like
Share

Joined: September 9th, 2002, 7:12 pm

March 24th, 2005, 5:41 pm #6

Hi Guido,

I did not save the pics, unfortunately, but my 1300m and 800m pics are still available in the Watch Foto Database.

1300m (first 6 pics):
http://www.ittc.ku.edu/~jgauch/watch/vi ... 1300m.html

800m (all):
http://www.ittc.ku.edu/~jgauch/watch/vi ... -800m.html
..
Quote
Like
Share

Joined: September 9th, 2002, 7:12 pm

March 24th, 2005, 5:55 pm #7

..
..
Quote
Like
Share